1. INSTALL REAR BUMPER COVER

(a) Engage the 12 claws and install the rear bumper cover.

(b) Engage the 2 harness clamps and connect the connector.

(c) Tighten the 6 bolts for upper side of the rear bumper cover. Torque: 8.0 N·m (82 kgf·cm, 71 in·lbf)

(d) Tighten the 2 bolts for lower side of the rear bumper cover.

Torque: 9.0 N·m (92 kgf·cm, 80 in·lbf)

(e) Tighten the 2 screws and install the 2 clips.

2. INSTALL REAR QUARTER PANEL MUDGUARD LH

(a) Install the rear quarter panel mudguard with the 9 screws and clip.

3. INSTALL REAR QUARTER PANEL MUDGUARD RH

HINT:

Use the same procedure as for the LH side.